500 Litre Vertical Air Receiver

NS011061

9 Bar Design Pressure

610mm Diameter with 1500mm Shell

Built to ASME 8 – DIV 1 – NOT CODE STAMPED from P265GH or BS1501-151/161-430 A/B

5°C to 50°C and 1mm Corrosion Allowance

inspection by DNV with 100% UT & MPI

PED Category CAT 4 modules G

Group 2 Gases

3 X Support

MS Angle Legs

2 X Inspection Opening(s)

6″ ANSI B16.5 CL150 Flanged Branch With Cover

1 X Relief Valve

1/2″ ANSI B16.5 CL150 Flanged Branch

1 X Pressure Gauge

1/2″ ANSI B16.5 CL150 Flanged Branch

1 X Drain Valve

1/2″ ANSI B16.5 CL150 Flanged Branch

1 X water Inlet

1″ ANSI B16.5 CL150 Flanged Branch

1 X Air inlet

1/2″ ANSI B16.5 CL150 Flanged Branch

Hot dip galvanized to EN1461 – due to the steel type used

galvanising may not be uniform in thickness & appearance

Drawing Number (Orig)6471