Posts

,

Kipper Air Receivers and Pressure Vessel

Kipper Air Receivers / Pressure Vessel Kipper & Sons Fabricators Inc,  Auburn WA - 253-856-2625 These pressure vessel manufacturers based in Auburn produced welded pressure vessels and air receivers to ASME and U stamp and National…
20m3 green Abbotts pressure vessel containing a compressed gas

Big Green Monsters for your Compressed Gases

This green 20m3 pressure vessel will hold compressed air. It could be holding compressed hydrogen. Or biogas. Or Syngas. Or methane. Or steam. Or any other compressed gas. It's going to help our customer use energy on site more effectively...and…

Newark MP visit to Abbotts 

Remember Newark was briefly on the news when Nigel Farage and UKIP tried for the seat after Our last MP Patrick Mercer resigned last year over a cash for questions fracas  - well the new Newark MP Robert Jenrick visited recently  for…

HSE report on Failed Air Receivers ( not Abbotts !)

10 air receivers were tested and 10 air receivers failed. There are massive savings (and PROFITS) to be made by reducing the shell of an air receiver by 1mm. The 25% savings by taking 1mm off a 4mm thick Air Receiver is massive, and so is…

Vacuum Receiver Implodes – Video

Watch this ... https://www.youtube.com/watch?v=Zz95_VvTxZM Just as the design of a regular pressure vessel is critical, so is that of a vacuum tank or vacuum vessel.. Or else ... Not one of ours - and not designed or intended for vacuum anyway…

Hoval Pressure Vessel Refurbished

This Hoval pressure vessel picture below has been refurbished at our works in Newark The Hoval air receiver was blasted and the shell and ends thickness tested. The weld seams were ultrasonic tested (they were good !) and finally the Hoval…

Update on Rednal Pneumatics

I have been asked frequently of the situation with Rednal Pneumatics as we had a lot of customers in common, many of whom have been left without a reliable supplier. Here is an update on the company 23/11/12 REDNAL PNEUMATICS LTD (reg No.05506142)…

Update on Rednal Pneumatics

I have been asked frequently of the situation with Rednal Pneumatics as we had a lot of customers in common, many of whom have been left without a reliable supplier. Here is an update on the company 23/11/12 REDNAL PNEUMATICS LTD (reg No.05506142)…

Update on Rednal Pneumatics

I have been asked frequently of the situation with Rednal Pneumatics as we had a lot of customers in common, many of whom have been left without a reliable supplier. Here is an update on the company 23/11/12 REDNAL PNEUMATICS LTD (reg No.05506142)…

Update on Rednal Pneumatics

I have been asked frequently of the situation with Rednal Pneumatics as we had a lot of customers in common, many of whom have been left without a reliable supplier. Here is an update on the company 23/11/12 REDNAL PNEUMATICS LTD (reg No.05506142)…